Week 7 - Review of Arduino 1.0.exe Part2

Week 7 : 28th - 3th Nov

Objective:

1. Review the example of Arduino.exe.
2. Understanding every coding of the examples

Contents:

The picture show that the led blinking. The coding of blinking have been download to my Arduino Uno board. 

To download any coding to Arduino Controller, here the steps that have to folow

1.Compile

 Click the √ symbol. Then it will compiling the coding and check whether the code. Any error of the code will be display at the black screen.

When the compiling finish, it will display as the picture above.

2. Download

To download the coding, click the (->) symbol. Wait for the device to downloading. After the process finish, it will display as picture below. 

Now the coding have been download to the Arduino Uno board. 

Week 6 - Review of Arduino 1.0.exe Part1

Week 6 : 21th - 27th Oct

Objective:

1. Review the example of Arduino.exe.
2. Understanding every coding of the examples.

Contents:

1. Try to understanding the basics and simple examples of the Arduino coding.
2. Here is the simple Blink's coding from the example of the Arduino.

From the example of coding, we can see every command have their own comment. With that comment after the command, we can understand how the coding's flow to make the blinking led. 

Week 5 - Arduino Uno's Software Programming

Week 5 : 7th - 13th Oct

Objective:

1. Reviews of the Arduino Uno's Software Programming
2. Studying and understanding the basic examples of the Arduino coding. 

Contents:

The programing of the Arduino can be download here http://www.arduino.cc/. The software is freeware.

The Arduino 1.0.exe have more example that can be view. 

Week 4 - Arduino Uno Overview

Week 4 : 30th - 6th Oct

Objective:

1. Understand about the Arduino Uno Controller.
2. Investigate about the pin out of the Arduino Uno Controller.
3. Recognise the input and output pin of the Arduino Uno board.

Content:

From the picture above are the pin-out of the Arduino Uno that i used for the main controller of my Final Year Project. The supply for the controller is around 7-12V DC. The board have 28 pin-out. All the pin-out for the board we can see at the picture above